Monthly Archives: August 2013

ASIA MOLD

ASIA MOLD

 

We will attend the 7th Asia Mold. You can see the details information as follows:

Event: The 7th Asia Mold

Date: 2013-09-24—-2013-09-26

Our company name: Jiashan PVB Sliding Bearing Co.,Ltd

Products: Oiless Guide Bushing, Oiless Guide bearing,Oiles slide plate, Oiles wear plates, Oiles washers

Booth No: H28

Website: www.oilesbearing.com
We look forward to see you here! If any more information you need, please contact me freely!

PTC ASIA 2013

PTC ASIA

 

 

 

 

We will attend PTC ASIA 2013. Please refer to below for details

Event: PTC ASIA 2013(Power Transmission and Control)

Place: Shanghai New InternationalExpoCenter (SNIEC)

No.   2345 Longyang Road, Pudong New Area, Shanghai 201204, P. R. China
Date: 28-31 Oct 2013

Our company name: Jiashan PVB Sliding Bearing Co.,Ltd

Products: DU bushing, DX Bush, bimetal bush, bronze bush, spring bush,

oiles guide bush, wear plate, King Pin Bush, King Pin repair kits. Cast bronze bearing, Putzmeister bushing, Schwing Bushing bearing and etc

Booth No: N4—M14

Website: www.oilesbearing.com
We look forward to see you here! If any more information you need, please contact me freely!

Naval Brass Bushing Bearing

Naval Brass alloy offers an excellent hot forging ability and good corrosion resistance. These alloys serve fastener, marine hardware, pump & valve, and water flow systemindustries.

Naval Brass Bushing

We make all kinds of Naval Brass Bushing Bearing based on your requirement, size or samples. Here you can see the technical data of Naval Brass Bushes:

C48200 Naval Brass(CuZn37Pb1Sn1 CW714R)possesses excellentcapacity for hot working and adapts well for  hot forging and pressing. Typicalapplications include Marine hardware, screw machine products, valve stems.

Chemical Composition

Cu

Sn

Pb

Zn

Fe

Ni

Sb

P

S

Al

Mn

Si

59.00-62.00

0.5-1.0

0.40-1.0

reminder

0.10

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Mechanical Properties

Tensile Strength (min)

Yield Strength (at .5% extention under load min)

Elongation (in 2in. or 50mm min, %)

Brinell Hardness (min)

Remarks

Ksi

MPa

Ksi

MPa

360

140

20

65

If you need any Naval Brass bearing, please contact us TODAY!