+86 573 8435 1979
Home / Products / POM Lined Bushing
POM Lined Bushing

POM based sliding bearing also called DX bushing, boundary lubrication bearing,SF-2 oilless bearing,dry bearing, DX bearing and POM lined plain dry bush. It has similar material structure with DU bushing. The difference is the layer with POM coated.

Material Structure:

These materiais consist of metal backing bonded to a porous bronze sintered layer with PTFE based polymer bearing layer.The metal backing provides mechanical strength, while the bronze sinter layer provides a strong mechanical bonding between the backing and the bearing lining,the PTFE based polymer offers exceptional low friction even under dry condition.

POM Lined Bushing.jpg

1. POM with lead 0.3~0.5mm.

2. Porous bronze 0.2~0.3mm.

3. Steel backing 0.4~2.2mm.

4. Copper plating 0.008mm.


Bearing Design

Depending upon application requirements, PVB02 Series self lubricating bearing can be produced in many shapes and sizes from inner diameters 10mm to more than 300mm.

POM Lined Bushing.png


Advantages

Suitable for rotating and oscillating movement
Good damping performance, good resistance to shock loads
Less maintenance requirements due to the long re-lubrication intervals
Lower wear, lower susceptibility to edge loading, no absorption of water and therefore no swelling

POM Lined Bushing
  • Tel : +86 573 8435 1979
  • Tel : +86 573 8451 5689
  • Skype: pvbbearing
Jiashan PVB Sliding Bearing Co., Ltd.

Copyright © Jiashan PVB Sliding Bearing Co., Ltd. All Rights Reserved | Sitemap Technical Support: