|Description:||Gear Pump DU Bushing||Material:||Steel+Sintered Bronze+PTFE|
|Surface:||Copper Plating, Tin Plating||Advantages:||Perfect Performance Under High PV|
|Standard:||DIN 1494 / ISO 3547||Availability:||Cylindrical DU Sleeve Bushing|
0.03mm PTFE Lined Bushing,
PTFE Lined Bushing Gear Pump,
PTFE Gear Pump DU Bushing
PVB013 Steel Back PTFE lined Hydrualic Gear Pump Composite Plain Bushing
PVB013 hydraulic gear pump DU bushing is a kind of DU bushing special designed for pumps. Hydraulic self lubricating bearing has common structure with other DU bush. It's also called gear pumps DU bushing, SF-1T Sliding Bearing.
1.PTFE Mixture 0.01~0.03mm as sliding layer
2.Porous bronze 0.2~0.3mm
3.Steel backing 0.7~2.3mm
4.Tin-plating 0.005mm or copper plating 0.008mm
New type material which is designed on the basic of PVB010 oiless bearing
Low friction under oil lubricated condition.
Wear resistant and anti-impact.
Particularly applied for the high PV condition, at hydrodynamic lubrication, similar performance with DP4 bushing
Standard cylindrical bushing, thrust washers and strips are available.
Special designs are produced at short time
Lead free bushing is also available
PVB013 self-lubricating bushing is the best choice for all kinds of gear pumps plunger pumps, vane pumps and so on.
|Specific load capacity (static)||≤ 250 [ N/mm ]|
|Specific load capacity (dynamic)||≤ 140 N/mm at low speeds|
|Friction value||0.04 to 0.2|
|Temperature||-195 to +280 [ °C ]|
|Max. sliding speed||3m/s|
|Max. Pv (dry)||3.8N/mm2.m/s|
|Max. Pv (lubrication)||50N/mm2.m/s|
Bushing inner-Ø after mountingH9
Shaft tolerancef7 to h8
Housing: Mounting bevel min. 1.5 mm x 15-45°
Shaft Material:Steel, hardened or untempered, surface roughness ≤ Rz 2-3
Shaft: Mounting bevel 5 mm x 15°, edges rounded
The application of an adequate force fitting mandrel is advisable. Grease lubrication of the outer surface may be necessary when mounting.
Contact Person: Catherine Hu