|Description:||Bronze Bearing With Graphite Plugged Oil Pocket||Material:||CuSn8P0.3+Graphite|
|Lubrication:||Graphite Lubricated,maintentance-free||Advantages:||Excellent Wear Resistance|
|Application:||Automotive Transmission||Avalability:||Cylindrical Bronze Bearing, Thrust Washer|
Graphite Wrapped Bronze Bushings,
Graphite Wrapped Bronze Bearing ISO,
Lubrication Pocket Wrapped Bronze Bushings
PVB090G Bronze Wrapped Bearing With Lubrication Pockets Filled
PVB090G bronze rolled bearing is made of specially formulated high-density bronze alloy with oil pockets and graphite. This type of bronze sliding bearing also called FB090G bronze graphite bearing,bronze wrapped plain bearings.
Material: CuSn8P0.3+Graphite (DIN ISO 4382-2:1991)
|PVB090 Bronze Bushing||91.3||8.5||0.2|
Materail chemical composition refer to the standard of DIN17662 ISO 4382-2: 1991; CW453K
The actual composition proportion is allowed to up or down in certain range based on standard
Standard straight bronze bearing,brone hrust washers, strip
Special designs bronze bushes are produced based on your requirement.
CuSn6.5P0. 1 is also available.
PVB090G bronze wrapped bushing is widely used in automotive transmission
Bushing inner-Ø after mountingH9
Housing: Mounting bevel min. 1.5 mm x 15-45°
Shaft Material: Steel, hardened or untempered, surface roughness ≤ Rz 4-6
Shaft: Mounting bevel 5 mm x 15°, edges rounded
The application of an adequate force fitting mandrel is advisable. Grease lubrication of the outer surface may be necessary when mounting.
Stick-in: Adhesive should not contact the sliding surface
Contact Person: Catherine Hu