|Description:||Brass Rolled Bearing For Brake||Material:||H58,H62,H68 Brass|
|Lubrication:||Oil Grease,lubrication Pockets||Inside Surface:||Round Pockets|
|Application:||Brake System, Caliper Repair Kits||Avalability:||Straight Bronze Bush, Flanged Bronze Bushing, Thrust Washer|
Wrapped Bronze Bearing H62 H68,
Brake System Wrapped Bronze Bearing,
H68 Rolled Bronze Bushing Bearing
PVB093 Brake System H62 H68 Rolled Bronze Bushing Bearing
PVB093 brass rolled bearing is made of specially formulated high-density brass alloy with round oil pockets and grooves. This type of rolled bronze bearing also called , brake shoe bronze bearing,bronze wrapped plain bearings.
Material: H58,H62 or H68
Materail chemical composition refer to the standard of DIN17662 ISO 4382-2: 1991; CW453K
The actual composition proportion is allowed to up or down in certain range based on standard
PVB Bronze wrapped bushing use high density bronze strips to roll the spherical oil pockets as material structure.We can make rolled bronze bearing with dimond oil pockets, round oil pockets and smooth suface based on customers requirements.
|PVB093 Bronze bushings||Performance|
|Machinable||Consult with Applications Engineer|
PVB093 bronze rolled sleeve bearing is widely used in brake system, caliper repair kits
Bushing inner-Ø after mountingH9
Housing: Mounting bevel min. 1.5 mm x 15-45°
Shaft Material: Steel, hardened or untempered, surface roughness ≤ Rz 4-6
Shaft: Mounting bevel 5 mm x 15°, edges rounded
The application of an adequate force fitting mandrel is advisable. Grease lubrication of the outer surface may be necessary when mounting.
Stick-in: Adhesive should not contact the sliding surface
Contact Person: Catherine Hu