CuSn6.5P Bimetal Bushing Bronze Alloy Lead Free Bimetallic Bushing

 
 
PVB037 Steel Back CuSn6.5P Bronze Alloy Lead Free Bimetal Bushing
 
 

PVB037 wrapped bimetal sliding bearing is made of steel back with CuPb6Sn6Zn3 layer.the inner bronze alloy surface of  bimetal bush can be processed with various types of oil grooves, oil hole and oil pockets according to the different working applications, to suitable for the conditions which can not continuously put oils or difficult to apply the grease. 
 
 

 
1.Sinter bronze liner material: CuSn6.5P0.1
2. Metal backing low carbon steel back
 
 

Inner Surface Oil Pockets Types

Bimetal Bush Oil Grooves types

Bimetal Bushing Gap Types

 
 
Characteristics

• High fatigue strength
• High load capacity
• Good sliding performance
• It can replace the bimetal bearings with lead or copper bushings in many occasions.

• Standard cylindrical bimetal bushing, bimetal thrust washers and bimetal strips 
• Special designed bimetal bearings are produced at short notice

• Housing ØH7

• Bushing inner-Ø after mountingH9

• Shaft tolerancef7 

• Housing: Mounting bevel min. 1.5 mm x 15-45°

• Shaft Material:Steel, hardened or untempered, surface roughness ≤ Rz 6.3                                                                                 

• Shaft: Mounting bevel 5 mm x 15°, edges rounded

• The application of an adequate force fitting mandrel is advisable. Grease lubrication of the outer surface may be necessary when mounting