ISO 3547 Bimetal Bearings CuSn8Ni Lead Free Bimetal Bushing Sleeve

PVB038 Steel Back CuSn8Ni Bronze Alloy Lead Free Bimetal Bushing

PVB038 wrapped bimetal bearing is made of steel back with CuSn8Ni. This type of bimetal bushing is also called lead free bimetal bushing.

1.Sinter bronze liner material: CuSn8Ni

2. Metal backing low carbon steel back

Characteristics

• High fatigue strength
• High load capacity
• Good sliding performance
• It can replace the bimetal bearings with lead or copper bushings in many occasions.

•  Standard cylindrical bimetal bushing, bimetal thrust washers and bimetal strips 
•  Special designed bimetal bearings are produced at short notice

• Housing ØH7

• Bushing inner-Ø after mountingH9

• Shaft tolerancef7 

• Housing: Mounting bevel min. 1.5 mm x 15-45°

• Shaft Material:Steel, hardened or untempered, surface roughness ≤ Rz 6.3                                                                                 

• Shaft: Mounting bevel 5 mm x 15°, edges rounded

• The application of an adequate force fitting mandrel is advisable. Grease lubrication of the outer surface may be necessary when mounting.